This error is typically caused by a communication delay from the console’s UCB.

Steps

1. Unplug the power cord from your machine, leaving it unplugged for 10-15 minutes.

2. After 10-15 minutes, plug the power cord back into the machine. Check if the error message reappears.

3. If the UCB error returns, the issue may be able to be resolved on the backend. Please use the Contact Support link at the bottom of this page to get in touch with our JRNY Support Team for additional assistance.

This error typically occurs when the machine connection is blocked by a security feature on the router or by the Internet Service Provider (ISP).

Steps

1. Check for blocked devices in your ISP app or router interface.

   • The machine should show up as a vaguely named Android device (e.g., Generic Brand Android Device, Generic Android Tablet, Android, etc.).

   • ISP apps are typically named after the service provider (e.g., xFinity app, Spectrum app, TWC app, etc.)

2. If the blocked device is located, unpause or unblock the device. The error then should disappear within 30 seconds.

3. If no devices are paused/blocked, please troubleshoot using our Connectivity Troubleshooting Steps.

The 0AB error code typically occurs when the machine connection is blocked by a security feature on the router or by the Internet Service Provider (ISP).

Steps

1. Check for blocked devices in your ISP app or router interface.

   • The machine should show up as a vaguely named Android device (e.g., Generic Brand Android Device, Generic Android Tablet, Android, etc.).

   • ISP apps are typically named after the service provider (e.g., xFinity app, Spectrum app, TWC app, etc.)

2. If the blocked device is located, unpause or unblock the device. The 0AB error will disappear within 30 seconds.

3. If no devices are paused/blocked, please troubleshoot using our Connectivity Troubleshooting Steps.

Check the date/time settings on the console and confirm they are correct. Date/Time should be set automatically, but may not always be. 

• From the Log In or JRNY screen, rapidly tap in the upper right corner 10-15 times.

• From the Advanced User Actions menu, select Set Date/Time

• Tap to toggle Automatic date & time on.

• Tap Exit in the corner to save and return to the Log In screen. 

• Navigate to your device's App Store and check that any available updates are downloaded.

• Per your device's User Manual, clear the cache for the JRNY App.

• Attempt to use the app once more.